Feeder Layout
PrecautionHow To Check
With ProPILOT ASSIST 2.1
A melted fusible link can be detected by visual inspection. If its condition is questionable, use circuit tester or test lamp.
Fusible link
CAUTION:
If fusible link should melt, it is possible that critical circuit (power supply or large current carrying circuit) is short ...
Normal Operating Condition
When the back door position is in the range of [between "just before fully closed" and the position approximately less than 150 mm (5.91 in) from "just before fully closed" ], the back door does not operate even if any of switches are operated.
To operate the back door by switches, manually close ...
RADIATOR : Inspection
Check radiator for mud or clogging. If necessary, clean radiator as per the following:
Be careful not to bend or damage radiator fins.
When radiator is cleaned without removal, remove all surrounding parts such as radiator cooling fan assembly and horns. Then tape harness and connectors to prevent w ...