Exploded View
 |
Emblem A |  |
Emblem B |  |
Emblem C |
Removal and Installation
REMOVAL
Remove emblem from the panel while warming using an industrial dryer.
CAUTION:
Never damage the painted surface of the panel when removing.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Never reuse the emblem which was peeled.
-
Degrease the panel emblem mount.
-
If paint bumps, dust, etc., adhere to the emblem mounting surface, it may cause a defective appearance.
NOTE:
Refer to the figure below for the emblem B and emblem C mounting position.
|
Emblem B | |
Back door finisher | |
Back door panel |
 |
Emblem C | ||||
 |
: R end | ||||
| A | : 13.0 mm (0.512 in) | B | : 365.4 mm (14.386 in) | C | : 122.1 mm (4.807 in) |
| D | : 119.1 mm (4.689 in) | E | : 120.1 mm (4.728 in) | F | : 121.9 mm (4.799 in) |
| G | : 116.1 mm (4.571 in) | H | : 79.7 mm (3.138 in) |
Other materials
Basic information
When towing a Nissan Armada, it is essential to comply with all applicable local
and regional regulations. Using incorrect towing methods or equipment can lead to
serious vehicle damage.
For safe and proper towing, it is highly recommended that a professional towing
service handle the Nissan ...
Noise, Vibration and Harshness (nvh) Troubleshooting
NVH Troubleshooting Chart
Use chart below to find the cause of the symptom. If necessary, repair or replace these parts. Possible cause and suspected parts SYMPTOM Reference
Noise Shake Vibration Shimmy Judder Poor quality ride or handling
Improper installation, looseness
×
×
×
...
Automatic Back Door Switch Finisher
Removal and Installation
CAUTION:
Never damage the back door panel.REMOVALCAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.Fully open back door.
Apply protective tape (A) on back door lower finisher to protect it from damage.
Disengage automa ...