Description
Vehicle does not enter 4-wheel drive mode even though 4WD warning turned to OFF.
Diagnosis Procedure
CHECK DTC OF TRANSFER CONTROL UNIT
With CONSULT
-
Ignition switch ON.
-
Perform self-diagnosis for “AWD/4WD”.
Is any DTC detected?
YES >>Check DTC detected item. Refer to DTC Index.
NO>>GO TO 2.
CHECK 4WD SHIFT INDICATOR
Check 4WD shift indicator function. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Proceed to diagnosis procedure. Refer to Diagnosis Procedure.
CHECK 4WD SHIFT SWITCH FUNCTION (CHECK DTC OF CHASSIS CONTROL MODULE)
With CONSULT
Perform self-diagnosis for "CHASSIS CONTROL".
Is any DTC detected?
YES>>Check DTC detected item. Refer to DTC Index.
NO>>Transfer assembly is mechanical malfunction. Replace transfer assembly. Refer to Removal and Installation.
Other materials
Precautions
Precautions for Removing Battery Terminal
When disconnecting the 12V battery terminal, turn off the ACC power before disconnecting the 12V battery terminal, observing “How to disconnect 12V battery terminal” described below.
NOTE:
Some ECUs operate for a certain fixed time even after ignit ...
Side Window Glass
Exploded View
Body side outer panel
Side window glass
Glass primer
Adhesive
Edge
Adhesive mark
: Clip
: Always replace after every disassembly.
Unit: mm (in) Portion Primer range Adhesive range
L N
Side window glass - Bod ...
Combination Switch System Symptoms
Symptom Table
Perform “Data Monitor” of CONSULT to check for any malfunctioning item.
Check that the data monitor display switches in conjunction with the combination switch operation.
If there is a switch whose display does not change, specify the applicable combination switch circuit (IN ...