Work Procedure
CAUTION:
When after replacing audio amp, Configuration must be performed. Or not doing so, audio amp. control function does not operate normally.
REPLACE AUDIO AMP.
Replace audio amp. Refer to Removal & Installation.
>>
GO TO 2.
PERFORM AUDIO amp. CONFIGURATION
Perform audio amp. programming, according to “Replace ECU” of CONSULT Operation Manual. Refer to CONSULT Operation Manual.
>>
WORK END
Other materials
Third Seat Lh Position Initialization
Description
Perform the third seat LH position initialization when the following conditions are performed. For details, refer to Work Procedure.
Replacing third seat control unit LH.
Replacing third seat LH.
Manual function and folding function of third seat LH does not operate normally.
Work Proce ...
Second Seat Cushion Finisher
Disassembly and Assembly
CAUTION:
When disassemble, always use a remover tool that is made of plastic to prevent damage.OUTSIDE SEAT CUSHION FINISHER OUTERDisassemblyDisengage fixing pawls, and then remove reclining knob cap.
: Pawl
Disengage fixing portion using a remover tool (A) according ...
Exit Assist Function Does Not Operate
Diagnosis Procedure
CHECK SYSTEM SETTING
Check system setting. Refer to Description.
Check exit assist function operation.
Does it operate normally?
YES>>
Exit assist function is normal.
NO>>
GO TO 2.
CHECK DOOR SWITCH (DRIVER SIDE)
Check door switch (driver side). Refer to Compo ...