Removal and Installation
REMOVAL
Remove steering column cover lower. Refer to Removal and Installation.
Disengage the fixing pawls using a remover tool (A) and then remove tilt & telescopic switch.
 |
: Pawl |
INSTALLATION
Install in the reverse order of removal.
Other materials
Tire Pressure Sensor Id Registration
Description
This procedure must be performed.
After replacement of a tire pressure sensor or BCM.
After replacement of tire or road wheel.
NOTE:
ID registration is unnecessary if there are no change in the positions of each wheels (tire pressure sensors) before wheel removal and after wheel inst ...
Driver Knee Air Bag Module
Exploded View
Steering member
Driver knee air bag module
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
Removal and Installation
WARNING:
Always observe the following items for preventing accidental activation.
Before servicing, ignition switch OFF, di ...
Normal Operating Condition
Description
FRONT WIPER MOTOR PROTECTION FUNCTION
The CPU integrated in the front wiper motor may stop the front wiper to protect the front wiper motor if any obstruction (operation resistance) such as a large amount of snow is detected during the front wiper operation.
At that time turn OFF the ...