Description
When replacing automatic back door control unit necessary to perform initial setting to operate automatic back door system normally. Refer to Work Procedure.
Work Procedure
STEP 1
Fully close the back door manually.
>>
GO TO 2.
STEP 2
Operate back door opener switch and perform automatic back door open operation.
>>
GO TO 3.
STEP 3
-
The back door fully opens.
-
Check that automatic back door warning buzzer sounds normally.
Does automatic back door warning buzzer sound normally?
YES>>GO TO 4.
NO>>GO TO 1.
STEP 4
Fully close the back door.
>>
WORK END
Other materials
Torque Converter Clutch Point Learning
Descripton
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
TCM memorizes a torq ...
Front Shock Absorber
Exploded View
WITHOUT DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
Piston rod lock nut
Mounting insulator
Rubber seat
Coil spring
Dust cover
Bound bumper
Shock absorber
Lower link
: Always replace after every disassembly.
: N·m (kg-m, ft-l ...
Rear Lh Side Power Window Does Not Operate
When Both Power Window Main Switch and Rear Power Window Switch Lh Are Operated
Diagnosis Procedure
CHECK REAR POWER WINDOW MOTOR LH POWER SUPPLY AND GROUND CIRCUIT
Check rear power window motor LH power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YE ...