Inspection
WARNING:
-
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
FRONT DRIVE SHAFT INSPECTION
Check the following items, and replace the part if necessary.
-
Check drive shaft mounting point and joint for looseness and other damage.
CAUTION:
Replace entire drive shaft assembly when noise or vibration occur from drive shaft.
-
Check boot for cracks and other damage.
Other materials
System maintenance
Example
Basic information
The two radar sensors A for the I-BSI system are located near the rear bumper.
Always keep the area near the radar sensors clean.
The radar sensors may be blocked by temporary ambient conditions such as snow,
splashing water, mist or fog.
The blocked condition ma ...
Rear Automatic Air Conditioning System
Work Procedure
DESCRIPTIONThe purpose of the operation inspection is to check that the individual system operates normally. NOTE:
Check that front automatic air conditioning system operates normally. Refer to Work Procedure. Check condition
: Engine running at normal operating temperature.
OPERA ...
Wind Deflector
Exploded View
Refer to Exploded View.
Removal and Installation
REMOVALFully open the glass lid.
Disengage wind deflector fixing points using a remover tool (A) from moonroof unit assembly.
Remove wind deflector.
INSTALLATIONInstall in the reverse order of removal. ...