Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Additional Service When Replacing Intelligent Key Unit

Description

CAUTION:

When replacing the Intelligent Key unit, always replace it with a new one. The functions controlled by the Intelligent Key unit does not operate properly in case of reuse of the Intelligent Key unit from another vehicle.

Perform the following operations when replacing Intelligent Key unit. For details, refer to Work Procedure.

AFTER REPLACEMENT

CAUTION:

After replacing Intelligent Key unit, the following must be performed. Or not doing so, Intelligent Key unit control function does not operate normally.

  • Writing vehicle specification

  • Register Intelligent Keys

Work Procedure

REPLACE INTELLIGENT KEY UNIT

Replace Intelligent Key unit. Refer to Removal and Installation.

>>

GO TO 2.

WRITING vehicle SPECIFICATION

CONSULT Configuration

Perform configuration. Refer to Description.

>>

GO TO 3.

REGISTER INTELLIGENT KEYS

CAUTION:

If perform Intelligent Key registration before writing vehicle specification, unable to write vehicle specification. Always perform vehicle specification writing before Intelligent Key registration.

For initialization and registration of Intelligent Key: Refer to CONSULT Immobilizer mode and follow the on-screen instructions.

>>

WORK END

    Other materials

    Positive Crankcase Ventilation
    Inspection Start engine and let it idle. Replace PCV valve from the rocker cover. Refer to Removal and Installation. Connect PCV valve to PCV hose. Block and unblock the air hole of PCV valve and check if a hissing noise can be heard from the air hole. Is the inspection result normal? YES >> ...

    Automatic Back Door Switch
    Removal and Installation REMOVALRemove instrument pad A. Refer to Removal and Installation. Remove switch bracket fixing screws , and then remove switch bracket . Disengage automatic back door switch fixing pawls using a remover tool (A), and then remove automatic back door switch from the switch ...

    Steering Assist Switch
    Removal & Installation REMOVALRemove instrument pad A. Refer to Removal and Installation. Remove mounting screws , and remove switch panel from instrument pad A . Unhook the pawls to remove the switch from the switch panel .  INSTALLATIONInstallation is in the reverse order of removal. ...