Work Procedure
DRIVING VIDEO RECORDER CONTROL MODULE REPLACEMENT
Replace driving video recorder control module. Refer to Removal and Installation.
>>
GO TO 2.
WRITING OF VIN DATA TO DRIVING VIDEO RECORDER CONTROL MODULE
With CONSULT
-
Ignition switch ON and wait at least 5 seconds.
-
Select “Write vehicle identification number (manual input)� of “Work support� item using CONSULT.
-
Touch “Start� at “Write vehicle identification number (manual input)� screen to write the VIN data into new driving video recorder control module.
>>
GO TO 3.
DRIVING RECORDER INITIALIZATION
-
Touch to
display the settings menu, and then touch "Dash Cam". -
Touch "Reset All DashCam Settings to Default" in "System" to reset the driving recorder settings.
>>
GO TO 4.
PERFORM DRIVING VIDEO RECORDER CONTROL MODULE CONFIGURATION
With CONSULT
Touch "Replace ECU" of CONSULT, Perform driving video recorder control module configuration according to CONSULT.
>>
GO TO 5.
PERFORM SELF-DIAGNOSIS
With CONSULT
-
Perform a self-diagnosis for “Driving Video Recorder�. Refer to CONSULT Function.
-
Check DTC.
Are any DTCs detected?
YES>>Perform the trouble diagnosis for detected DTCs. Refer to DTC Index.
NO>>WORK END
Other materials
Car phone or CB radio
When installing a car phone or CB radio system in your Nissan Armada, it is essential
to follow proper installation guidelines. Incorrect installation may interfere with
the vehicle’s electronic control modules and wiring systems, potentially affecting
performance and safety.
WARNING
Us ...
Second Seat Cushion
Disassembly and Assembly
DISASSEMBLYRemove seatback trim and pad. Refer to Disassembly and Assembly.
Disengage seat cushion trim fixing retainers .
LH seat
: vehicle front
RH seat
Disengage seat cushion trim fixing retainers .
LH seat
RH seat
Disengage seat cushion trim fixing ...
Sub Woofer
Removal & Installation
REMOVALRemove luggage side lower finisher LH. Refer to Removal and Installation.
Remove sub woofer mounting nuts , and then remove sub woofer .
Disconnect sub woofer harness connector.INSTALLATIONInstall in the reverse order of removal. ...