Work Procedure
Always perform the side radar configuration after replacing the side radar.
SIDE RADAR CONFIGURATION
Perform saving vehicle internal information according to "Replace ECU" in CONSULT Operation Manual.
>>
GO TO 2.
SIDE RADAR ALIGNMENT
Perform the side radar alignment with CONSULT. Refer to Work Procedure.
>>
GO TO 3.
PERFORM SELF-DIAGNOSIS
Perform the self-diagnosis of side radar with CONSULT. Check if any DTC is detected.
Is any DTC detected?
YES>>Perform the trouble diagnosis for the detected DTC.
-
Side radar (Front left): Refer to DTC Index
-
Side radar (Front right): Refer to DTC Index
-
Side radar (Rear left): Refer to DTC Index
-
Side radar (Rear right): Refer to DTC Index
INSPECTION END
Other materials
Overhead console
WARNING
Always keep the Nissan Armada overhead console closed while driving to prevent
obstruction of the driver’s view and reduce the risk of accidents.
CAUTION
Use the Nissan Armada overhead console only for storing sunglasses or
similarly small items.
Avoid leaving sunglasses i ...
Reporting safety defects
For USA
If you believe your Nissan Armada has a defect that could lead to a crash, injury,
or even death, it is essential to report the issue immediately.
You should notify both the National Highway Traffic Safety Administration (NHTSA)
and NISSAN to ensure that the concern is properly documen ...
Calibration of Yaw Rate Sensor
Description
CAUTION:
Always perform the yaw rate sensor calibration before driving when the following operation is performed. Refer to Work Procedure.×: Required —: Not required Procedure Yaw rate sensor calibration
Removing/ installing ABS actuator and electric unit (control unit)
×
Rep ...