Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals
Nissan Armada manual library

Nissan Armada 2025-2026 Owner's Manual: Connection to Roadside Assistance

In the event of a roadside emergency involving your Nissan Armada, professional Roadside Assistance services are available to provide support.

Refer to your Warranty Information Booklet (U.S.) or Warranty & Roadside Assistance Information Booklet (Canada) for full details regarding coverage, services, and contact information.

Emergency engine shut off

If it becomes necessary to immediately shut off the Nissan Armada engine while driving due to an emergency, follow one of the procedures below:

  • Quickly press the push-button ignition switch three times within 1.5 seconds, or
  • Press and hold the push-button ignition switch for more than 2 seconds.

These emergency shutdown procedures allow the Nissan Armada engine to stop safely in critical situations. However, steering and braking effort may increase once the engine is turned off, so maintain firm control of the vehicle.

    Other materials

    System maintenance
    Example Basic information The two radar sensors A for the I-BSI system are located near the rear bumper. Always keep the area near the radar sensors clean. The radar sensors may be blocked by temporary ambient conditions such as snow, splashing water, mist or fog. The blocked condition ma ...

    System temporarily unavailable
    While operating the Nissan Armada, certain road environments such as winding mountain routes, steep inclines, sharp curves, narrow lanes, or areas under construction can temporarily affect the performance of the driver assistance systems. In these situations, the sensors may incorrectly id ...

    Radiator
    Inspection Check radiator for mud or clogging. If necessary, clean radiator as per the following: Be careful not to bend or damage radiator fins. When radiator is cleaned without removal, remove all surrounding parts such as radiator cooling fan assembly and horns. Then tape harness and connector ...