Nissan Armada 2025-2026 Service and Repair Manual: Additional Service When Replacing Ecm
When replacing ECM, the following procedure must be performed. (For details, refer to Work Procedure.)
CAUTION:
When replacing the ECM, always replace it with a new one. The functions controlled by the ECM does not operate properly in case of reuse of the ECM from another vehicle.
PROGRAMMING OPERATION
NOTE:
After replacing with a blank ECM, programming is required to write ECM information. Be sure to follow the procedure to perform the programming.
Service After Replacing or Removing Engine Parts
×:Applicable
Part name Service performed Service Manual item Reference Replacement Removal ECM × — Additional service when replacing ECM Refer to Work Procedure. Accelerator pedal posi ...
Work Procedure
Work Procedure (Before Replacing ECM)
NOTE:
After replacing with a blank ECM, programming is required to write ECM information. Be sure tofollow the procedure to perform the programming. According to ...
Other materials:
Removal and Installation
REMOVAL
Remove headlining assembly. Refer to Removal and Installation.
Remove fixing screws and disengage metal clips , and then remove rear ventilator grille housing.
Disengage fixing metal clips , and then remove rear ventilator grille.
INSTALLATION
Install in the reverse order of removal. ...
Inspection
WARNING:
DESCRIPTION
Measure wheel alignment under unladen conditions.
NOTE:
“Unladen conditions” means that fuel, engine coolant, and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
PRELIMINARY CHECK
Check the following:
Tires for improper air pressure an ...
System temporarily unavailable
Condition A:
In the Nissan Armada, the LDW and I-LI warning and assist features may be temporarily
unavailable under specific operating conditions. These systems are designed to function
only when appropriate driving parameters are met.
When the turn signal is activated and the Nissan Armad ...
0.0054