Description
When electric shift selector is replaced, always perform "Replace ECU" of CONSULT function to write vehicle specifications. For work procedure, refer to Work Procedure.
Work Procedure
WRITING VEHICLE SPECIFICATIONS
With CONSULT
-
Ignition switch ON.
-
Select "ELECTRIC SHIFTER".
-
Select "Replace ECU"
-
Perform the work according to the procedure displayed in CONSULT.
>>
GO TO 2.
CHECKING THE SELF-DIAGNOSIS RESULT
With CONSULT
Check the DTC.
Is the DTC detected?
YES>>Check the detected DTC. Refer to DTC Index.
NO>>WORK END
Other materials
How to enable/disable the BSW system
Vehicle information display
Steering-wheel-mounted controls (right side)
To configure the Nissan Armada BSW system, follow these steps:
1. Press the
button until "Settings" appears in the vehicle information display, then confirm
using the scroll dial. Navigate to " ...
Rear Differential Gear Oil
Inspection
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
OIL LEAKAGEMake sure ...
Battery Terminal with Fusible Link
Exploded View
Without ProPILOT ASSIST 2.1
Battery fix frame
Battery cover
Negative cable
Battery current sensor
12V battery
Battery fix rod
Battery fix rod clip
Battery tray
Battery positive terminal
Battery positive terminal cover
Battery terminal with fusible link ...