Diagnostic Work Sheet
Work ProcedureRemoval and Installation
REMOVAL
Disconnect the battery current sensor connector .
Remove negative cable mounting nut , and then remove the negative cable .
Loosen battery current sensor mounting nut , and then remove the battery current sensor .
INSTALLATION
Install in the reverse order of removal. ...
Hooks and Other Tools
(1) HOOKS
Unlike clamps which grab an object, hooks are curved tools that pull on the body. When a hook is used, it must be set so that the point where the body is pulled and the position of the hook's chain are lined up straight.
When a hook is used, a piece of wood, etc. should be inserted betwee ...
Approach Unlock/walk Away Lock Function Does Not Operate (all Keys)
Approach unlock/walk away lock function does not operate.
NOTE:
SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS)
Door lock operation (remote keyless entry) Door lock operation (one touch sensor or request switch of front/rear/back door) or trunk/back door open operation (opener switch ...