Nissan Armada 2025-2026 Service and Repair Manual: Additional Service When Replacing Front Camera Unit

Work Procedure

If system detects that driver is not facing forward even though driver is facing forward, perform face recognition check. PREPARATION BEFORE FACE RECOGNITION CHECK Make sure that all of the following ...

Work Procedure

Always perform the front camera unit configuration after replacing the front camera unit. Always perform the camera aiming after removing and installing or replacing the front camera unit. CAUTION: T ...

Other materials:

Inspection and Adjustment
REAR WASHER NOZZLE (CHECK VALVE) Inspection Check that air can pass through by blowing forward direction (toward nozzle side), and check that air cannot pass through by sucking reverse direction (toward washer tank side). REAR WASHER NOZZLE SPRAY POSITION Inspection NOTE: Refer to the figure below ...

Diagnosis Procedure
COMBINATION SWITCH INSPECTION Check combination switch. Refer to Symptom Table. Is the inspection result normal? YES>> GO TO 2. NO>> Repair or replace the malfunctioning part. CHECK FRONT FOG LIGHT REQUEST SIGNAL With CONSULT Select “Front fog lamp request” in “Data Monitor” mo ...

Scribing Chisels
Chisels are generally used to cut sheet metal. They are also used in body repair work. There are numerous types of chisels. This section, however, describes scribing chisels used exclusively for bending sheet metal or for shaping panel press lines. This type of chisel must have a smoothly rounded ed ...