Nissan Armada 2025-2026 Service and Repair Manual: Work Procedure
Always perform the front camera unit configuration after replacing the front camera unit.
Always perform the camera aiming after removing and installing or replacing the front camera unit.
CAUTION:
The system does not operate normally unless the front camera unit configuration and the camera aiming adjustment are performed. Always perform them.
FRONT CAMERA UNIT CONFIGURATION
>>GO TO 2.
CAMERA AIMING ADJUSTMENT
Perform the camera aiming adjustment with CONSULT. Refer to Work Procedure.
>>GO TO 3.
PERFORM SELF-DIAGNOSIS
Perform the self-diagnosis of front camera unit with CONSULT. Check if any DTC is detected.
Is any DTC detected?
YES>>Perform the trouble diagnosis for the detected DTC. Refer to DTC Index.
NO>>GO TO 4.
ACTION TEST
Perform the following system action test.
LDW: Refer to Work Procedure.
I-LI: Refer to Work Procedure.
I-BSI: Refer to Work Procedure.
TSR: Refer to Work Procedure.
Check that the each system operates normally.
WORK END
Other materials:
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Exploded View
Luggage side upper finisher RH Rear pillar finisher RH Luggage side lower finisher RH Seat belt hook Seat switch escutcheon RH Rope hook Back pillar garnish LH Luggage side upper finisher LH Rear pillar finisher LH Seat switch escutcheon LH Luggage side lower finisher LH Luggage floor r ...
Inspection
WARNING:
INSPECTION BEFORE REMOVAL
Drive belt
WARNING:
Be sure to perform the this step when engine is stopped.
Check that the indicator (notch on fixed side) of drive belt auto-tensioner is within the possible use range.
NOTE:
Check the drive belt auto-tensioner indication when the engine is cold.
...
0.0052