Description
Each function is reset to the following condition when the steering column control module is replaced. For details, refer to Work Procedure.
| Function | Condition | Procedure |
|---|---|---|
| Memory (Steering column) | Erased | Perform memory storing |
Work Procedure
REPLACE STEERING COLUMN CONTROL MODULE
Replace steering column control module. Refer to Removal and Installation.
>>
GO TO 2.
PERFORM THE STEERING COLUMN POSITION LEARNING
Perform the steering column position learning. Refer to Description.
>>
GO TO 3.
MEMORY STORING
Perform memory storing. Refer to Description.
>>
WORK END
Other materials
Difference between predictive and actual distances
Basic information
The Nissan Armada display guide lines and their projected positions on the ground
are intended as approximate references only and should not be relied upon as exact
measurements.
Due to factors such as road incline, uneven terrain, and objects that extend
outward, the actua ...
Air Breather
Exploded View
Clip A
Air breather tube
Clip B
Air breather hose A
Clip C
Clip D
Hose connector
Air breather hose B
Bracket
Clip E
Hose clamp
Air breather
Rear final drive assembly
: vehicle front
: N·m (kg-m, in-lb)
: Alway ...
Entry Assist/driving Position Return Function Does Not Operate
Diagnosis Procedure
CHECK LOG-IN FUNCTION
Check log-in function. Refer to System Description.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer to Work Flow.
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check door lock/unlock using Intelligent Key button operation.
Does door lock/unloc ...