Description
Check anti-pinch function when the initialization of moonroof and sunshade system is performed. Refer to Work Procedure.
Work Procedure
CHECK ANTI-PINCH FUNCTION
-
Fully open the moonroof.
-
Place a piece of wood near the fully closed position.
-
Close the moonroof completely with auto closed.
-
Check that moonroof opens for approximately 145 mm (5.71 in) without pinching a piece of wood and stops.
-
Fully open the sunshade.
-
Place a piece of wood near fully closed position.
-
Close the sunshade completely with auto closed.
-
Check that sunshade opens for approximately 145 mm (5.71 in) without pinching a piece of wood and stops.
CAUTION:
-
Never check with hands or another part of the body because they may be pinched. never get pinched.
-
When the distance between pinching position and fully-open position is less than 145 mm (5.71 in), moonroof or sunshade reverses to fully-open position.
Is the inspection result normal?
YES>>END
NO>>Perform initialization procedure. Refer to Description.
Other materials
Precautions
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
When disconnecting the 12V battery terminal, turn off the ACC power before disconnecting the 12V battery terminal, observing “How to disconnect 12V battery terminal” described below.
NOTE:
Some ECUs operate for a certain fixed time ev ...
Parting Seal
Exploded View
Parting seal A
Parting seal B
Parting seal C
Double-sided tape
[t: 0.8 mm (0.031 in)]
Double-sided tape
[t: 2.5 mm (0.098 in)]
: Clip
: vehicle front
: Always replace after every disassembly.
Removal and Installation
REMOVALCAUTION:
Never use ...
Display Unit Symptoms
Symptom Table
Symptom Reference
TELLTALE DOES NOT LAMP WHEN IGNITION SWITCH IS OFF TO ON
Refer to Diagnosis Procedure.
DISPLAY SCREEN IS NOT DISPLAYED (INFORMATION DISPLAY)
Refer to Diagnosis Procedure.
...