Description
Moonroof and sunshade does not operate normally.
-
Moonroof Tilt UP/DOWN, OPEN/CLOSE or sunshade OPEN/CLOSE does not operate.
-
Moonroof Tilt UP/DOWN, OPEN/CLOSE or sunshade OPEN/CLOSE operation is slow.
-
Judder occurs during OPEN/CLOSE operation of moonroof and sunshade.
Diagnosis Procedure
CHECK GLASS LID
Check the following items.
-
Cracks, damage, or deformation of weather-strip.
-
Sticking of weather-strip.
-
Loose or missing glass lid mounting bolt.
-
Misalignment of glass lid. Refer to Adjustment.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK MOONROOF UNIT ASSEMBLY
Check the following items.
-
Damage, deformation or trapped foreign material of slide rail.
-
Insufficient application of grease to sliding section of slide rail. Refer to Removal and Installation.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK SUNSHADE
Check sunshade for damage, deformation, of interference with other parts.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace the malfunctioning parts.
CHECK BCM POWER SUPPLY AND GROUND CIRCUIT
Check BCM power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 5.
NO>>Repair or replace the malfunctioning parts.
CHECK MOONROOF MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check moonroof motor assembly power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 6.
NO>>Repair or replace the malfunctioning parts.
CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check sunshade motor assembly power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 7.
NO>>Repair or replace the malfunctioning parts.
CHECK LIN COMMUNICATION CIRCUIT
Check LIN communication circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 8.
NO>>Repair or replace the malfunctioning parts.
CHECK COMMUNICATION SIGNAL CIRCUIT
Check communication signal circuit. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 9.
NO>>Repair or replace the malfunctioning parts.
CHECK MOONROOF SWITCH AND SUNSHADE SWITCH
Check moonroof switch and sunshade switch.
-
Moonroof switch: Refer to Component Function Check.
-
Sunshade switch: Refer to Component Function Check.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Repair or replace the malfunctioning parts.
Other materials
Basic information
WARNING
Failure to properly follow all warnings and operating instructions for the
Rear Automatic Braking (RAB) system in the Nissan Armada may result in serious injury
or even fatal accidents.
The Nissan Armada RAB system is designed as a supplemental driver assistance
feature and shoul ...
Back Door Stay
Removal and Installation
CAUTION:
Perform work with 2 workers, because it is heavy weight.
Support back door with a proper material and use protective tape or shop cloth to protect back door and body from falling and damage when removing and installing back door stay.
REMOVALSupport back door a ...
Front Door Module Assembly
Removal and Installation
REMOVALCAUTION:
Before removing, take a short memo/photo to remember door harness and cable layout.Remove front door glass. Refer to Removal and Installation.
Disconnect harness connectors , and then disengage harnesses fixing clips.
: Clip
Remove hole seals from fro ...