Symptom TableAdditional Service When Replacing Intelligent Key Unit
CAUTION:
When replacing the Intelligent Key unit, always replace it with a new one. The functions controlled by the Intelligent Key unit does not operate properly in case of reuse of the Intelligent Key unit from another vehicle.
Perform the following operations when replacing Intelligent Key unit. ...
Removal and Installation
WARNING:
REMOVAL
Remove oil pan. Refer to Removal and Installation.
Remove heat shield mounting bolts () and heat shield .
Disconnect harness connector from control valve & TCM.
NOTE:
Rotate connector counterclockwise then pull out to remove as shown.
Remove control valve & TCM mounting ...
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...