Removal and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect automatic back door control unit harness connector.
Remove automatic back door control unit mounting nuts 
, and then remove automatic back door control unit 
.
INSTALLATION
Install in the reverse order of removal.
NOTE:
After installing automatic back door control unit, perform additional service when replace automatic back door control unit. Refer to Description.
Other materials
Rear Final Drive Assembly
Exploded View
Final drive mounting bracket
Rear final drive assembly
Upper stopper
Lower stopper
Washer
: N·m (kg-m, ft-lb)
: Always replace after every disassembly.
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to g ...
Front Seat Cushion Finisher
Disassembly and Assembly
CAUTION:
When disassemble, always use a remover tool that is made of plastic to prevent damage.OUTSIDE SEAT CUSHION FINISHER OUTERDisassemblyApply protective tape (A) to prevent damage.
Disengage fixing clip(s) and pawls using a remover tool (A), and then remove outside se ...
Door Lock and Unlock Switch
Driver Side
Removal and Installation
CAUTION:
Never bend the pawl of power window switch finisher.REMOVAL
Remove power window switch finisher (driver side). Refer to Removal & Installation.
Disengage door lock and unlock switch (driver side) fixing pawls using a remover tool (A), and then re ...