Removal and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect back door auto closure control unit harness connector.
Remove back door auto closure control unit mounting nuts 
, and then remove back door auto closure control unit 
.
INSTALLATION
Install in the reverse order of removal.
Other materials
Drive Belt Auto Tensioner and Idler Pulley
Exploded View
Idler pulley
Drive belt auto-tensioner
: N·m (kg-m, ft-lb)
: vehicle front
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. ...
Passenger Air Bag Module
Exploded View
Instrument panel assembly
Steering member
Passenger air bag module
: Clip
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: Indicates that the part is connected at points with same symbol in actual vehicle.
Removal and Installation
WARNING:
Alway ...
Front Camera Unit
Without Propilot Assist 2.1
Exploded View
Bracket
Front camera unit
Cover
Removal and Installation
REMOVALUsing a suitable tool, release clips , and remove cover .
Disconnect front camera unit harness connector.
Release pawls of bracket, and remove front camera unit from bracket.
I ...