Exploded View
 |
Front heater & cooling unit assembly |  |
In-cabin microfilter |  |
Filter cover |
 |
Front blower motor |  |
A/C auto amp. |  |
Front blower unit |
 |
Intake door motor | ||||
 |
: Pawl | ||||
| : vehicle front | |||||
Removal and Installation
REMOVAL
Remove front heater & cooling unit assembly and front blower unit as an assembly. Refer to Removal and Installation.
Disconnect intake door motor harness connector 
and disengage harness fixing clip 
.
Remove fixing screw , and then remove front blower unit.
Remove following parts from front blower unit.
-
Intake door motor: Refer to Removal and Installation.
-
A/C auto amp.: Refer to Removal and Installation.
INSTALLATION
Install in the reverse order of removal.
Other materials
Overhead console
WARNING
Always keep the Nissan Armada overhead console closed while driving to prevent
obstruction of the driver’s view and reduce the risk of accidents.
CAUTION
Use the Nissan Armada overhead console only for storing sunglasses or
similarly small items.
Avoid leaving sunglasses i ...
Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCEDETAILED FLOWINTERVIEW FOR MALFUNCTION
It is also important to clarify the customer concerns before starting the inspection. Interview the customer about the concerns carefully and understand the symptoms fully.
NOTE:
The customers are not professionals. Never assume that ...
Door Lock and Unlock Switch
Driver Side
Removal and Installation
CAUTION:
Never bend the pawl of power window switch finisher.REMOVAL
Remove power window switch finisher (driver side). Refer to Removal & Installation.
Disengage door lock and unlock switch (driver side) fixing pawls using a remover tool (A), and then re ...