When installing a car phone or CB radio system in your Nissan Armada, it is essential to follow proper installation guidelines. Incorrect installation may interfere with the vehicle’s electronic control modules and wiring systems, potentially affecting performance and safety.
WARNING
- Using a cellular phone while driving the Nissan Armada can be distracting and may lead to accidents. Always prioritize safe driving. In many regions, handheld phone use while driving is restricted or prohibited.
- If communication is necessary while driving, it is strongly recommended to use a hands-free system available in the Nissan Armada. Maintain full attention on the road at all times.
- If you need to take notes during a call, safely pull over and stop the Nissan Armada before doing so.
CAUTION
- Install the antenna as far away as possible from the electronic control modules in your Nissan Armada to avoid interference.
- Ensure that antenna wiring is routed at least 20 cm (8 inches) away from electronic harnesses and does not run parallel to them.
- Adjust the antenna standing-wave ratio according to the manufacturer’s specifications for optimal performance.
- Properly ground the CB radio chassis to the vehicle body to ensure stable operation.
- For professional installation and optimal compatibility, it is recommended to consult an authorized Nissan Armada dealer.
Other materials
RAB system operation
Vehicle information display
RAB system warning indicator (vehicle information display)
RAB system OFF warning light (instrument panel)
Steering-wheel-mounted controls (right side)
Touch screen display
The Nissan Armada RAB system becomes active when the transmission is shifted
in ...
Brake Caliper Assembly
Exploded View
REMOVAL
Brake caliper assembly
: N·m (kg-m, ft-lb)
DISASSEMBLY
Cap
Bleeder valve
Cylinder body
Sliding pin
Bushing
Sliding pin boot
Piston seal
Piston
Piston boot
Torque member
: vehicle ...
Anti-Pinch Inspection
Description
Check anti-pinch function when the initialization of moonroof and sunshade system is performed. Refer to Work Procedure.
Work Procedure
CHECK ANTI-PINCH FUNCTION
Fully open the moonroof.
Place a piece of wood near the fully closed position.
Close the moonroof completely with auto c ...