Exploded View
WITHOUT DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
Without ProPILOT ASSIST 2.1
 |
Chassis control module |  |
Bracket |
With ProPILOT ASSIST 2.1
|
Chassis control module | |
Bracket |
WITH DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
|
Chassis control module | |
Bracket |
Removal and Installation
REMOVAL
CAUTION:
When replacing chassis control module, configuration of chassis control module is required. Refer to Description.
Without Dynamic Digital Suspension And Electronic Air Suspension
Remove the glove box. Refer to Removal and Installation.
Disconnect the chassis control module harness connector 
, and remove mounting screws 
and chassis control module .
-
WITHOUT ProPILOT Assist 2.1
-
WITH ProPILOT Assist 2.1
Remove the chassis control module from bracket .
-
WITHOUT ProPILOT Assist 2.1
-
WITH ProPILOT Assist 2.1
With Dynamic Digital Suspension And Electronic Air Suspension
Remove the glove box. Refer to Removal and Installation.
Disconnect the chassis control module harness connectors , and remove mounting screws and chassis control module .
Remove the chassis control module from bracket .
INSTALLATION
Note the following, install in the reverse order of removal.
When replacing the chassis control module, be sure to perform the configuration of chassis control module. Refer to Description.
Other materials
Precautions
Precautions for Removing Battery Terminal
When disconnecting the 12V battery terminal, turn off the ACC power before disconnecting the 12V battery terminal, observing “How to disconnect 12V battery terminal” described below.
NOTE:
Some ECUs operate for a certain fixed time even after ignit ...
Tire Pressure Sensor
Exploded View
Screw
Tire pressure sensor
Valve
Valve core
Valve cap
: N·m (kg-m, in-lb)
: Always replace after every disassembly.
: Parts that are replaced as a set when the tire is replaced.
Removal & Installation
WARNING:
Jacking up or lift up the vehicle ma ...
Simplified Confirmation by Birds-Eye View Screen
Work Procedure
If the front grille upper is removed or replaced, perform the simplified confirmation by birds-eye view screen.CAUTION:
This procedure should only be performed if the front grille upper has been removed or replaced.
Perform camera calibration when removing or replacing each camera ...