Exploded View
 |
Bracket |  |
Electric intake valve timing control module | ||
| : vehicle front | |||||
 |
: N·m (kg-m, in-lb) | ||||
Removal & Installation
REMOVAL
Remove air cleaner body. Refer to Removal and Installation.
Remove harness clip to bracket.
Disconnect electric intake valve timing control module harness connector. HARNESS CONNECTOR (LEVER LOCKING TYPE) in Refer to Harness Connector.
Remove electric intake valve timing control module mounting nuts ( 
) and remove electric intake valve timing control module from the bracket.
Remove bracket mounting nuts ( ) and remove the bracket ①.
INSTALLATION
Install in the reverse order of removal.
CAUTION:
Perform ELECTRIC IVT CONTROL ACTUATOR POSITION LEARNING. Refer to Work Procedure.
Other materials
Hazard warning flasher switch
Press the hazard warning flasher switch in the Nissan Armada to alert other drivers
when your vehicle must stop or is parked under emergency conditions. Once activated,
all turn signal lights will flash simultaneously to increase visibility.
WARNING
In an emergency, always move the Niss ...
Precautions
PRECAUTIONS FOR PROCEDURE WITHOUT COWL TOP COVER
When performing the procedure after removing cowl top cover, cover the lower end of windshield with urethane, etc to prevent damage to windshield.
PRECAUTIONS FOR REMOVING BATTERY TERMINAL
When disconnecting the 12V battery terminal, turn off the ...
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...