Exploded View
 |
Crash zone sensor |  |
Radiator core support lower | ||
| : vehicle front | |||||
 |
: Always replace after every disassembly. | ||||
 |
: N·m (kg-m, ft-lb) | ||||
Removal and Installation
WARNING:
Always observe the following items for preventing accidental activation.
-
Before servicing, ignition switch OFF, disconnect 12V battery negative terminal and wait for 3 minutes or more (discharges electricity held in the additional power supply circuit of the air bag diagnosis sensor unit). Refer to Precautions for Removing Battery Terminal.
-
Never use air tools or electric tools for servicing.
REMOVAL
Remove engine under cover front. Refer to Removal and Installation.
Disconnect crash zone sensor harness connector.
Remove crash zone sensor mounting nut, and then remove crash zone sensor.
CAUTION:
-
To prevent damage to the parts, never impact the crash zone sensor.
-
Replace crash zone sensor if it is dropped or sustains an impact.
-
Replace crash zone sensor of deployed driver air bag module, deployed passenger air bag module, deployed driver knee air bag module, deployed passenger knee air bag module, seat belt pre-tensioner and deployed lap pre-tensioner.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Never reuse mounting nut after removal, replace with new one.
-
Always install normally aligning to the cutout hole, because performance of the crash zone sensor excessively fluctuates according to the installation position.
-
After installation is completed, perform self-diagnosis using CONSULT and confirm if the system is normal. Refer to Work Flow.
-
After the work is completed, check that no system malfunction is detected by air bag warning lamp.
Other materials
Overhead console
WARNING
Always keep the Nissan Armada overhead console closed while driving to prevent
obstruction of the driver’s view and reduce the risk of accidents.
CAUTION
Use the Nissan Armada overhead console only for storing sunglasses or
similarly small items.
Avoid leaving sunglasses i ...
A/t Fluid Cooler
Cleaning
Whenever an A/T is replaced, the A/T fluid cooler mounted in the radiator must be inspected and cleaned.Metal debris and friction material, if present, can become trapped in the A/T fluid cooler. This debris can contaminate the newly serviced A/T or, in severe cases, can block or restrict t ...
Steering Wheel Turning Force Is Heavy or Light
Description
Steering wheel turning force is heavy or light.
Diagnosis Procedure
PERFORM SELF-DIAGNOSIS
With CONSULT
Pull the parking brake switch.
NOTE:
Check to make sure that the parking brake switch indicator is turned ON.
Ignition switch OFF.
Get out of the vehicle and close all doors.
W ...