Nissan Armada 2025-2026 Service and Repair Manual: Crash Zone Sensor

Removal and Installation

WARNING: Always observe the following items for preventing accidental activation. Always work from the side of air bag module. Never work in front of it. Never use air tools or electric tools for serv ...

Exploded View

Crash zone sensor Radiator core support lower : Vehicle front : Always replace after every disassembly. : N·m (kg-m, ft-lb) ...

Other materials:

Work Procedure
WRITING VEHICLE SPECIFICATION With CONSULT Ignition switch ON. Perform writing vehicle specification to BCM following "Automatic Configuration" procedure of "Configuration" according to CONSULT Operation Manual. NOTE: Log in the network according to CONSULT guidance. >> WORK END ...

Work Procedure
CAUTION: When performing the following operations, always use CONSULT. (It cannot be performed by any means other than CONSULT.) Connect external power supply and so on not to lower the 12 V battery voltage. NOTE: When replacing the electrical brake control unit, check the procedure for the title n ...

Disassembly and Assembly
DISASSEMBLY Put a matching mark between propeller shaft and flange yoke as shown. CAUTION: For matching mark, use paint. Never damage the surface. Remove snap rings . Lightly tap bottom of yoke using a copper hammer and remove journal bearing. CAUTION: Never damage the yoke. Remove grease nipp ...