Description
Interview sheet sample
| Interview sheet | |||||
|---|---|---|---|---|---|
| Customer name | MR/MS | Registration number | Initial year registration | ||
| Vehicle type | VIN | ||||
| Storage date | Engine / Traction motor | Mileage | km (Mile) | ||
| Symptom | â–¡The steering wheel position (center) is in the wrong position. | ||||
| â–¡Warning lamp turns on. | |||||
| □Noise  □Vibration | |||||
□Others (                                     ) | |||||
| First occurrence | □Recently  □Others (                          ) | ||||
| Frequency of occurrence | □Always  □Under a certain conditions of  □Sometimes (time(s)/day) | ||||
| Climate conditions | â–¡Irrelevant | ||||
| Weather | □Fine  □Cloud  □Rain  □Snow  □Others (           ) | ||||
| Temperature | □Hot  □Warm  □Cool  □Cold  □Temperature [Approx.     °C (°F)] | ||||
| Relative humidity | □High  □Moderate  □Low | ||||
| Road conditions | □Urban area  □Suburb area  □High way □Mounting road (uphill or down hill)  □Rough road | ||||
| Operation conditions, etc. | □Irrelevant □When engine starts  □During idling □During driving  □During acceleration  □At constant speed driving □During deceleration  □During cornering (right curve or left curve) □During steering | ||||
| Other conditions | |||||
Memo | |||||
Work FlowPlastic Repair
Plastic welding can be used as a repair method only on thermoplastics.
Work preparation
Repairs must always be carried out from the inner to the outer side of the component, which means that in most cases, it is necessary to disassemble the damaged body component.
The repair area must always be thor ...
Work Procedure
REPLACE DRIVER SEAT CONTROL UNIT
Replace driver seat control unit. Refer to Removal and Installation.
>>
GO TO 2.
Vehicle SPECIFICATION RECOGNITION
Connect battery negative terminal. Power switch ON and wait for 30 seconds or more.
NOTE:
When the driver seat control unit receives a signal f ...
RADIATOR : Removal & Installation
WARNING:
REMOVAL
WARNING:
Never remove radiator cap and reservoir tank cap when engine is hot. Serious burns could occur from high-pressure engine coolant escaping from engine cooling system. Wrap a thick cloth around the cap. Slowly turn it a quarter of a turn to release built-up pressure. Carefull ...