Nissan Armada 2025-2026 Service and Repair Manual: Disassembly and Assembly
DISASSEMBLY
Put a matching mark between propeller shaft and flange yoke as shown.
CAUTION:
For matching mark, use paint. Never damage the surface.
Remove snap rings 
.
Lightly tap bottom of yoke using a copper hammer and remove journal bearing.
CAUTION:
Never damage the yoke.
ASSEMBLY
Install journal bearing to journal.
CAUTION:
Never reuse journal and journal bearing.
Always replace journal, journal bearing, and snap rings as a set.
Apply multi-purpose grease to journal bearing.
Install bearing
using a vise.
CAUTION:
Never damage bearing or flange yoke.
Measure journal axial play. If necessary, select the appropriate snap ring.While pushing to 98 N·m (10 kg-m, 72 ft-lb), check the clearance between snap ring and needle bearing 
.
| Journal axial play | : Refer to Journal. |
CAUTION:
Never reuse snap ring.
Select snap rings with a difference in thickness at both sides within 0.02 mm (0.0008 in). For selecting snap ring, refer to the latest parts information.
Install snap rings .
| Joint flex torque | : Refer to Journal. |
NOTE:
The joint flex torque may not be satisfied soon after the assembly.
Check the journal axial play. Refer to Inspection.
Removal and Installation
WARNING:
REMOVAL
Put matching mark on rear propeller shaft flange yoke and final drive companion flange.
CAUTION:
Remove propeller shaft assembly fixing bolts and nuts.
Remove propeller shaft assem ...
Inspection
INSPECTION AFTER REMOVAL
Appearance
Propeller Shaft Runout
Propeller shaft runout : Refer to Propeller Shaft Tube.
Journal Axial Play
Journal axial play : Refer to Journal.
Joint Flex Torque
...
Other materials:
Diagnosis Procedure
CHECK HEAD UP DISPLAY MAIN SWITCH OPERATION
With CONSULT
Turn ignition switch ON.
Select "Main switch" in "Data Monitor" mode of "Head Up Display” using CONSULT.
Check "Main switch" indication as per the following condition.
Monitor item Condition Indication Main switch Head Up Display main ...
Exploded View
Front door panel Grommet Front door striker TORX bolt Front door check link Front door hinge (lower) Front door hinge (upper) Front door weather-strip Front door parting seal rear Front door parting seal front Drain hole cover : Clip : Always replace after every disassembly. : N·m (kg- ...
Work Flow
DETAILS OF TROUBLE DIAGNOSIS FLOWCHART
COLLECT THE INFORMATION FROM THE CUSTOMER
It is also important to clarify customer concerns before starting the inspection. First of all, perform an interview utilizing diagnostic work sheet and reproduce the symptom as well as fully understand it. Depending on ...
0.0068