Nissan Armada 2025-2026 Service and Repair Manual: Disposal
CAUTION:
When performing disposal operation, wear the protective glasses and protective gloves.
Fix back door stay 
using a vise (C).
CAUTION:
When cutting a hole on back door stay, always cover a hacksaw (A) using a shop cloth (B) to avoid scattering metal fragments or oil.
Using hacksaw slowly make 2 holes in the back door stay, in numerical order as shown in the figure.
| A: | 20.0 mm (0.787 in) |
 : | Cut at the groove. |
Removal and Installation
CAUTION:
Perform work with 2 workers, because it is heavy weight.
Support back door with a proper material and use protective tape or shop cloth to protect back door and body from falling and damage w ...
Other materials:
Removal and Installation
WARNING:
CAUTION:
Front bumper fascia assembly is made of resin. Never apply excessive force to it, and be careful to prevent contact with oil.
REMOVAL
Remove front grille. Refer to Removal and Installation.
Remove front bumper energy absorber A.
Disengage active grille shutter fixing clips .
Di ...
Removal and Installation
REMOVAL
Remove front seat cushion trim and pad. Refer to Disassembly and Assembly.
Disengage fixing pawls and then remove front seat cushion blower motor.
: Pawl
Disengage front seat cushion blower motor harness fixing clip.
Disconnect front seat cushion blower motor connector and then remove fro ...
Exploded View
Frame Stopper rubber Suspension arm Axle housing : Always replace after every disassembly. : N·m (kg-m, ft-lb) ...
0.0059