Diagnosis Procedure
Automatic brake hold function does not operate when the operating conditions are satisfied.
PERFORM SELF-DIAGNOSIS (CHASSIS CONTROL MODULE)
With CONSULT
Perform self-diagnosis for “CHASSIS CONTROL”.
Is DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 2.
CHECK AUTOMATIC BRAKE HOLD SWITCH
Check the automatic brake hold switch. Refer to Component Inspection.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Replace the parking brake switch (automatic brake hold switch). Refer to Removal and Installation.
PERFORM SELF-DIAGNOSIS [ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)]
With CONSULT
Perform self-diagnosis for “ABS”.
Is DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>Replace the chassis control module. Refer to Removal and Installation.
Other materials
I-BSI driving situations
Indicator on
Indicator off
Indicator flashing
Illustration 1 - Approaching from behind
Another vehicle approaching from behind
Illustration 1: In the Nissan Armada, the side indicator light will illuminate
when a vehicle enters the detection zone from the rear in an adjacent lane, h ...
Air cleaner
To access the air filter in your Nissan Armada, release the retaining clips 1
and carefully lift the air cleaner housing upward 2.
The air filter element in the Nissan Armada is designed for single use and should
not be cleaned or reused. Replace it strictly according to the recommended mai ...
Gps Antenna
Feeder Layout
GPS antenna
AV control unit
Harness connector (M323)
Harness connector (M412)
Clip with connector (M325)
: Clips
To antenna feeder (vehicle side)
Removal & Installation
REMOVALRemove the ins ...