Removal and Installation
CAUTION:
Never bend the pawl of power window switch finisher.
REMOVAL
-
Remove power window switch finisher (driver side). Refer to Removal & Installation.
-
Disengage door lock and unlock switch (driver side) fixing pawls using a remover tool (A), and then remove door lock and unlock switch (driver side)
from the power window switch finisher (driver side).
: Pawl 
INSTALLATION
Installation is in the reverse order of removal.
Other materials
Rear Oil Seal
Removal & Installation
REMOVALRemove transmission assembly, refer to the following:
2WD models: Refer to Removal and Installation.
4WD models: Refer to Removal and Installation.
Remove drive plate. Refer to Removal and Installation.
Remove rear oil seal with a suitable tool.
CAUTION:
B ...
Map Lamp Bracket
Removal and Installation
REMOVALRemove headlining assembly. Refer to Removal and Installation.
Disengage body harness fixing clips , and then remove body harness from map lamp bracket.
: vehicle front
Remove map lamp bracket.
Without moonroof models
Remove map lamp bracket fixing clips .
...
Road Wheel
Rotation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
Follow the maintenan ...