
![]() | Intelligent rear view mirror cover LH | ![]() | Intelligent rear view mirror cover RH | ![]() | Intelligent rear view mirror |
![]() | Inside mirror base | ||||
![]() | : Pawl | ||||
![]() | : N·m (kg-m, in-lb) | ||||
Removal and InstallationExploded View
Idler pulley Alternator Drive belt auto-tensioner Crankshaft pulley A/C compressor Water pump Drive belt A/C compressor belt View Indicator Range when new drive belt is installed Possible use range Always replace after every disassembly. ...
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Check operation condition of the function that is malfunctioning.
>>
GO TO 2.
CHECK DTC
Check DTC.
Perform the following procedure if DTC is detected.
Record DTC and freeze frame data (Print them out using CONSULT.)
Erase DTC.
Ar ...
ON BOARD DIAGNOSTIC (OBD) SYSTEM : Precautions
The ECM has an on board diagnostic system. It will illuminate the malfunction indicator lamp (MIL) to warn the driver of a malfunction causing emission deterioration.
CAUTION:
Always turn the ignition switch OFF and disconnect the negative battery cable before any repair or inspection work. The open ...