Anchoring with Frame Attachments
Frame Repair Method according to Deformation TypeRemoval and Installation
WARNING:
REMOVAL
Remove front bumper fascia. Refer to Removal and Installation.
Disconnect the harness connector from the distance sensor.
Mounting the distance sensor bracket Remove the bolts and remove the distance sensor bracket from the front bumper reinforcement.
Remove the distance sensor m ...
Removal and Installation
REMOVAL
Without Dynamic Digital Suspension and Electronic Air Suspension
Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation.
Loosen rear lower link mounting nuts (frame side).
Set suitable jack under axle housing.
CAUTION:
Check the stable condition when using a suitable jack.
Nev ...
PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...