Without Propilot Assist 2.1
Exploded View
 |
Bracket |  |
Front camera unit |  |
Cover |
Removal and Installation
REMOVAL
Using a suitable tool, release clips 
, and remove cover .
Disconnect front camera unit harness connector.
Release pawls 
of bracket, and remove front camera unit from bracket.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
Do not touch or shock the front camera unit lens area or drop the front camera unit.
-
To operate the system normally, perform the following operations when the front camera unit is replaced or removed.
-
Be sure to perform "ADDITIONAL SERVICE WHEN REPLACING FRONT CAMERA UNIT" when replacing front camera unit. Refer to Work Procedure.
-
Perform camera aiming every time the front camera unit is removed and installed. Refer to Work Procedure.
-
With Propilot Assist 2.1
Exploded View
|
Front camera unit |
Removal and Installation
REMOVAL
Remove luggage side lower finisher LH. Refer to Removal and Installation.
Disconnect front camera unit 
harness connectors .
Remove mounting bolts , and remove front camera unit .
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
Do not touch or shock the front camera unit lens area or drop the front camera unit.
-
To operate the system normally, perform the following operations when the front camera unit is replaced.
-
Be sure to perform "ADDITIONAL SERVICE WHEN REPLACING FRONT CAMERA UNIT" when replacing front camera unit. Refer to Work Procedure.
-
Other materials
Brake System Service Data and Specifications
General Specifications
BRAKE SYSTEMUnit: mm (in) Front brake
Cylinder bore diameter
50.8 × 2 (2.000 × 2)
Pad length × width × thickness
151.6 × 53.2 × 12.0 (5.97 × 2.094 × 0.47)
Rotor outer diameter × thickness
350.0 × 30.0 (13.78 × 1.18)
Rear brake
Cylinder bore diamet ...
Additional Service When Replacing Power Window Motor
Description
When each power window motor replaced, the initialization is necessary for normal operation of power window system. Refer to Work Procedure.CAUTION:
The following specified operations cannot be performed under the non-initialized condition.
Auto-up operation
Anti-pinch function
Wo ...
Nissanconnect Tools and Preparation
Preparation
Commercial Service Tools
Tool name Description
Power tool
Loosening screws
...