Removal & Installation
REMOVAL
Remove the front door finisher. Refer to Removal and Installation.
Disconnect front door squawker harness connector.
Remove the front door squawker mounting screws 
, and then remove front door squawker 
.
INSTALLATION
Installation is in the reverse order of removal.
Other materials
Transfer Control Unit
Exploded View
Transfer control unit
: N·m (kg-m, in-lb)
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking an ...
Calibration of G Sensor
Description
CAUTION:
Always perform the decel G sensor calibration and side G sensor calibration before driving when the following operation is performed. Refer to Work Procedure.×: Required —: Not required Procedure
Decel G sensor calibration
Side G sensor calibration
Removing/ installi ...
Intelligent Key
Description
Automatic back door open/close function does not operate using Intelligent Key.
Diagnosis Procedure
CHECK REMOTE KEYLESS ENTRY FUNCTION
Check remote keyless entry function.
Does door lock/unlock with Intelligent Key button?
YES>>
GO TO 2.
NO>>
Refer to Diagnosis Procedure.
...