Exploded View
 |
Front bumper fascia assembly |  |
U nut |  |
Front side spoiler RH |
 |
Front spoiler |  |
Front side spoiler LH | ||
 |
: Rivet | ||||
 |
: Always replace after every disassembly. | ||||
Removal and Installation
WARNING:
REMOVAL
Remove fixing rivets .
NOTE:
Grind rivet with a drill (B) [bit of φ4.7 − φ4.9 mm (φ0.185 − φ0.193 in)].
Remove fixing clip and mounting bolts 
, and then remove front spoiler.
Remove fixing clip and mounting bolts , and then remove front side spoiler.
Remove U nuts from front bumper fascia assembly.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
NOTE:
Securely crimp rivet with a hand riveter (A).
Other materials
Speed Limit Assist (a feature of ProPILOT Assist 1.1 and 2.1)
Speed Limit Assist in the Nissan Armada is an advanced functionality integrated
within the ProPILOT Assist 1.1 and 2.1 systems. This feature works in conjunction
with the built-in map locator and Traffic Sign Recognition (TSR) system to help
drivers maintain compliance with posted speed limits ...
Additional Service When Replacing Bcm
Description
CAUTION:
When replacing the BCM, always replace it with a new one. The functions controlled by the BCM does not operate properly in case of reuse of the BCM from another vehicle.
When before pairing of BCM and Intelligent Key unit, always writing the BCM configuration. Or not doing s ...
Parameter Writing
Work Procedure
DescriptionWhen replace each camera, it is necessary to write the camera parameters using CONSULT.Write to around view monitor control unit according to "Parameter writing" procedure of "CONSULT Operation Manual".Work ProcedurePARAMETER WRITING
CONSULT
Ignition switch ON.
Select " ...