Inspection
WARNING:
-
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
COMPONENT PART
Make sure that the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal.
WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE)
Check the following items, and replace the part if necessary.
-
Move wheel hub and bearing assembly in the axial direction by hand. Check there is no looseness of wheel bearing.
Axial end play : Refer to Wheel Bearing. -
Rotate wheel hub and make sure there is no unusual noise or other irregular conditions. If there is any of irregular conditions, replace wheel hub and bearing assembly.
Other materials
A/t Fluid Cooler Tube
Exploded View
A/T assembly
A/T fluid cooler tube assembly
Bracket
Bracket
A/T fluid cooler hose A
A/T fluid cooler hose B
To A/T fluid cooler. Refer to Exploded View.
: Clip
: N·m (kg-m, in-lb)
Removal and Installation
WARNING:
Jacking ...
Transfer Control Actuator
Exploded View
Transfer assembly
Transfer control actuator
bracket
: N·m (kg-m, in-lb)
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer t ...
Additional Service When Replacing Adas Control Unit 2
Without Propilot Assist 2.1
Work Procedure
Always perform the additional service after replacing the ADAS control unit 2.ADAS CONTROL UNIT 2 CONFIGURATION
Perform saving vehicle internal information according to "Replace ECU" in CONSULT Operation Manual.
>>
GO TO 2.
VIN REGISTRATION
Turn ...