Removal and Installation
REMOVAL
Remove instrument lower panel LH. Refer to Removal and Installation.
Remove fixing screw 
, and then remove front in-vehicle sensor.
Remove aspirator duct from front heater & cooling unit assembly.
INSTALLATION
Install in the reverse order of removal.
Other materials
Satellite Sensor
Exploded View
Front door satellite sensor
B-pillar satellite sensor
C-pillar satellite sensor
: vehicle front
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
Removal and Installation
WARNING:
Always observe the following items for preventing accidental activatio ...
Second Seat Cushion
Disassembly and Assembly
DISASSEMBLYRemove seatback trim and pad. Refer to Disassembly and Assembly.
Disengage seat cushion trim fixing retainers .
LH seat
: vehicle front
RH seat
Disengage seat cushion trim fixing retainers .
LH seat
RH seat
Disengage seat cushion trim fixing ...
Combination Switch
Removal and Installation
REMOVALCAUTION:
Never reuse combination switch. Always replace it with a new one when it is removed.Remove spiral cable. Refer to Removal & Installation.
Disconnect harness connector from combination switch.
Remove the combination switch mounting screw .
Pull out the ...