Adjustment
Removal and InstallationRemoval and Installation
REMOVAL
Remove back door finisher. Refer to Removal and Installation.
Disconnect license plate lamp harness connectors.
Remove back door opener switch assembly fixing pawls using a remover tool (A), and then remove back door opener switch .
: Pawl
INSTALLATION
Install in the reverse order of re ...
Removal and Installation
CAUTION:
Never excessively pull body side welt.
Never damage the body panel.
REMOVAL
Front Body Side Welt
Pull the mounting part inside the vehicle to the outside of the vehicle, and then remove front body side welt.
CAUTION:
Remove the headlining portion of front body side welt slowly and carefu ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...