Special Service Tool
|
Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
|
KV101207S0 ( — ) Unified fuel lock ring wrench |
|
Removing and installing fuel tank lock ring |
|
KV10119800 ( — ) Fuel tank lock ring wrench |
|
Removing and installing fuel tank rock ring a: 187 mm (7.36 in) |
Commercial Service Tools
| Tool name | Description | |
|---|---|---|
| Power tool |
|
Loosening bolts and nuts |
FUEL SYSTEM : Service Setting Parts
| Name | Description |
|---|---|
| Filler tube guide 17261 6RA0A | Fuel draw out |
Other materials
System temporarily unavailable
While operating the Nissan Armada, certain road environments such as winding
mountain routes, steep inclines, sharp curves, narrow lanes, or areas under construction
can temporarily affect the performance of the driver assistance systems. In these
situations, the sensors may incorrectly id ...
Rear Pillar Finisher
Removal and Installation
CAUTION:
Never damage the body panel.REMOVALCAUTION:
When removing, always use a remover tool that is made of plastic to prevent damage to the parts.Remove luggage side lower finisher. Refer to Removal and Installation.
Apply protective tape (A) on rear pillar finisher to pr ...
Seat Cushion Blower Motor
Removal and Installation
REMOVALRemove front seat cushion trim and pad. Refer to Disassembly and Assembly.
Disengage fixing pawls and then remove front seat cushion blower motor.
: Pawl
Disengage front seat cushion blower motor harness fixing clip.
Disconnect front seat cushion blower motor con ...