Commercial Service Tools
HFO-1234yf (R-1234yf) Service Tool and Equipment
-
Never mix HFO-1234yf (R-1234yf) refrigerant and/or its specified lubricant with CFC-12 (R-12) or HFC-134a (R-134a) refrigerant and/or its lubricant.
-
Separate and non-interchangeable service equipment must be used for handling each type of refrigerant/lubricant.
-
Refrigerant container fittings, service hose fittings and service equipment fittings (equipment which handles refrigerant and/or lubricant) are different between HFO-1234yf (R-1234yf) and CFC-12 (R-12) or HFC-134a (R-134a). This is to avoid mixed use of the refrigerants/lubricant.
-
Never use adapters that convert one size fitting to another: refrigerant/lubricant contamination occurs and A/C compressor malfunction may result.
NOTE:
The actual shape of the tools may differ from those illustrated here.
|
Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
|
(NI-52405) R1234YF RRR Service Kit |
|
Function: Refrigerant recovery, recycling and recharging |
|
(TIFZX) Electrical refrigerant leak detector |
|
Function: Detects refrigerant leaks |
| Refrigerant identifier equipment (R-1234yf) |
|
For checking refrigerant purity and system contamination |
| Power Tool |
|
Loosening nuts, screws and bolts |
| Manifold gauge set (with hoses and couplers) |
|
Identification: The gauge face indicates HFO-1234yf (R-1234yf) |
|
Service hoses
|
|
Hose color:
|
|
Service couplers
|
|
Hose fitting to service hose: M12 x 1.5 fitting is optional or permanently attached |
| Refrigerant weight scale |
|
For measuring of refrigerant Fitting size: Thread size 1/2″-16 ACME |
|
Vacuum pump (Including the isolator valve) |
|
Fitting size: Thread size
|
Sealant or/and Lubricant
| Tool name | Description | |
|---|---|---|
| HFO-1234yf (R-1234yf) refrigerant |
|
Container color: - Container marking: HFO-1234yf (R-1234yf) Fitting size: Thread size
|
| ND-OIL12 |
|
Type: Polyalkylene glycol oil (PAG), ND-OIL12 Application: HFO-1234yf (R-1234yf) swash plate A/C compressors |
Other materials
Wheel Alignment
Inspection
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
DESCRIPTIONMeasure w ...
Inside Key Antenna
Console
Removal and Installation
REMOVALRemove front center console bracket. Refer to Removal and Installation.
Disconnect inside key antenna (console) harness connector.
Remove inside key antenna (console) fixing TORX bolts , and then remove inside key antenna (console) .
INSTALLATIONInstall in t ...
Intelligent Rear View Mirror System Does Not Operate
Diagnosis Procedure
INTELLIGENT REAR VIEW MIRROR FUNCTIONAL INSPECTION
Ignition switch ON.
Check the intelligent rear view mirror system is operating normally after setting power supply lever of intelligent rear view mirror lower part to ON.
Is the inspection result normal?
YES>>
GO TO ...










