Commercial Service Tool
| Tool name | Description | |
|---|---|---|
| Bit ratchet |
|
Remove mode door motor A: 25mm (0.984 in) - 45mm (1.772 in) |
Other materials
Diagnosis Sensor Unit
Exploded View
Diagnosis sensor unit
: vehicle front
: Always replace after every disassembly.
: N·m (kg-m, in-lb)
Removal and Installation
WARNING:
Always observe the following items for preventing accidental activation.
Before servicing, ignition swit ...
Rear Expansion Valve
Removal and Installation
REMOVALCAUTION:
When disconnect the A/C piping related parts, cap or wrap the joint of those parts with suitable material such as vinyl tape to avoid the entry of air.Remove rear evaporator. Refer to Removal and Installation.
Remove mounting bolts , and then remove rear expa ...
System Initialization
Description
Initialization of system should be conducted after the following conditions. Refer to Work Procedure.
When the moonroof motor assembly or sunshade motor assembly is replaced.
When the moonroof or sunshade does not operate normally. (Incomplete initialization conditions)
Work Procedu ...