Inspection
Exploded ViewInspection
INSPECTION AFTER REMOVAL
Appearance
Check the following items, and replace the part if necessary.
Upper link and bushing for deformation, cracks or damage.
Ball joint boot for cracks or other damage, and also for grease leakage.
Ball Joint Inspection
Manually move ball stud to confirm it moves smoo ...
Removal and Installation
WARNING:
REMOVAL
Disconnect negative battery terminal. Refer to Removal and Installation.
Remove rear propeller shaft. Refer to Removal and Installation .
Remove front propeller shaft. Refer to Removal and Installation.
Disconnect transfer control actuator and transfer range position sensor harness ...
Removal and Installation
WARNING:
REMOVAL
CAUTION:
When removing the A/T assembly from engine, first remove the crankshaft position sensor (POS) from the A/T assembly.
Be careful not to damage sensor edge.
When replacing A/T assembly, Perform "ADDITIONAL SERVICE WHEN REPLACING TRANSMISSION ASSEMBLY". Refer to Description.
...