With CONSULT
Check Ignition timing in “Data monitor” mode of “ECM” using CONSULT.
| Specification | : Refer to Ignition Timing. |
Ignition Timing
Evap Leak CheckRemoval and Installation
CAUTION:
Never damage front door panel.
REMOVAL
Remove front door finisher. Refer to Removal & Installation.
Remove inside seal according to numerical order 1→2 indicated by arrows as shown in the figure.
Apply protective tapes (A) on front door panel to protect it from damage.
Disengage f ...
Removal and Installation
REMOVAL
Seat Belt Retractor (LH and RH)
Remove third seat assembly. Refer to Removal and Installation.
Remove anchor plate mounting anchor bolt .
Remove shoulder anchor.Remove back pillar garnish. Refer to Removal and Installation. Remove shoulder anchor mounting anchor bolt , and then remove shou ...
Exploded View
REMOVAL
Member Cotter pin Steering gear assembly : Vehicle front : N·m (kg-m, ft-lb) : Always replace after every disassembly.
DISASSEMBLY
Outer socket Outer socket lock nut Boot clamp (small diameter) Boot Boot clamp (large diameter) Inner socket Gear housing assembly : N·m (kg ...