INSPECTION AFTER INSTALLATION
Check fluid leakage and the fluid level. Refer to Inspection.
Removal and Installation
Input Oil SealPrecautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
How to Use Hammer and Dolly
(1) HAMMER-ON-DOLLY
This is also known as dinging on the dolly. The dolly is held directly under the area being struck with the hammer. Hammering smoothes the dented metal between the dolly and hammer. This method causes the sheet metal to stretch.
Hammering on a dolly is most effective for repairi ...
Disassembly and Assembly
DISASSEMBLY
Remove bracket from rear final drive assembly.
Remove drain plug and gasket from rear cover and drain gear oil.
Remove filler plug and gasket from rear cover.
Remove differential lock position switch. Refer to Removal and Installation.
Remove the side oil seals. Refer to Removal and Inst ...