Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
WARNING:
REMOVAL
Remove the drain plug to drain the transfer fluid. Refer to Draining.
Remove the rear propeller shaft. Refer to Removal and Installation.
Remove the rear oil seal.
CAUTION:
Never damage rear case and output shaft.
INSTALLATION
Install rear oil seal with a drift (commercial service tool) until metal flange part 
reach the surface of rear case 
.
CAUTION:
Never reuse rear oil seal.
Apply transfer fluid onto circumference of oil seal.
When installing, never incline rear oil seal.
Never handle the oil seal inner periphery and oil seal lip.
Install the rear propeller shaft. Refer to Removal and Installation.
Fill with new transfer fluid. Refer to Refilling.
Exploded View
Transfer assembly Rear oil seal : Vehicle front : Always replace after every disassembly. : Apply transfer fluid. ...
Inspection
INSPECTION AFTER INSTALLATION
Check fluid leakage and the fluid level. Refer to Inspection. ...
Other materials:
Exploded View
Front heater & cooling unit assembly In-cabin microfilter Filter cover Front blower motor A/C auto amp. Front blower unit Intake door motor : Pawl : Vehicle front ...
FRONT BRAKE CALIPER ASSEMBLY : Exploded View
REMOVAL
Brake caliper assembly : N·m (kg-m, ft-lb)
DISASSEMBLY
Cap Bleeder valve Cylinder body Sliding pin Bushing Sliding pin boot Piston seal Piston Piston boot Torque member : Vehicle front : N·m (kg-m, ft-lb) : NISSAN rubber grease. : NISSAN brake fluid No.2500 : Always re ...
Inspection
INSPECTION AFTER REMOVAL
Wheel Hub and Bearing Assembly
Check the wheel hub and bearing assembly for wear, cracks, and damage. Replace if necessary.
Axle Housing
Check the axle housing for wear, cracks, and damage. Replace if necessary.
Ball Joint Inspection
Check for boot breakage, axial looseness, ...
0.0051