Nissan Armada 2025-2026 Service and Repair Manual: Inspection

Nissan Armada 2025-2026 Service and Repair Manual / Suspension / Front Suspension — Removal and Installation / Front Shock Absorber / Inspection

WITHOUT DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION

Inspection After Removal

Check shock absorber for oil leakage or other malfunctions. Replace it if necessary.

Inspection After Installation

Check wheel alignment. Refer to Inspection.

WITH DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION

Inspection After Removal

Check shock absorber for oil leakage or other malfunctions. Replace it if necessary.

Inspection After Installation

Make sure the electronic air suspension function is turn ON. Refer to Operation.
Confirm that no warning message is displayed on the information display. Refer to Air suspension warning.
Perform the self-diagnosis with CONSULT. Check if any DTC is detected. Refer to CONSULT Function.
Confirm to close the hood.
Always check for the air leakage with soapy water.
Check wheel alignment. Refer to Inspection.

Disassembly & Assembly

DISASSEMBLY Without Dynamic Digital Suspension and Electronic Air Suspension CAUTION: Never damage shock absorber piston rod when removing components from shock absorber. Install shock absorber attach ...

Adjustment

WITHOUT DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION Adjustment After Installation Adjust neutral position of steering angle sensor. Refer to Work Procedure. WITH DYNAMIC DIGITAL SUSPENSIO ...

Other materials:

Exploded View
Front Foot Lamp (LH) Steering member assembly Front foot lamp bracket (LH) Front foot lamp (LH) : Pawl : Vehicle front Front Foot Lamp (RH) Front foot lamp (RH) Front foot lamp bracket (RH) Passenger knee air bag module : Pawl : Vehicle front ...

Draining
WARNING: The ignition switch OFF. Remove engine under cover. Refer to Exploded View. Remove drain plug and gasket. Drain gear oil. Set a gasket on drain plug and install it to final drive assembly. CAUTION: Never reuse gasket. Tighten drain plug to the specified torque. Refer to Exploded View. I ...

Precautions for Removing Battery Terminal
NOTE: NOTE: NOTE: The removal of 12V battery may cause a DTC detection error. HOW TO DISCONNECT 12V BATTERY TERMINAL Disconnect 12V battery terminal according to instruction described below. Open the hood. Turn ignition switch to the ON position. Turn ignition switch to the OFF position with the d ...

0.0048