Exploded ViewPrecautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Exploded View
Side oil seal Rear final drive assembly Rear cover Gasket Drain plug Stud bolt Filler plug : N·m (kg-m, ft-lb) : Always replace after every disassembly. : Apply Genuine Liquid Gasket, Three Bond 1217 or equivalent. Refer to Recommended Chemical Products and Sealants. ...
Work Procedure (Group B)
*1: When the same malfunction is detected in two consecutive trips, MIL will illuminate. *2: After experiencing driving pattern B and D, permanent DTC is erased. *3: Indication does not change unless the ignition switch is turned from ON to OFF twice even after experiencing driving pattern B ...